A-A-55568/3C
TABLE I. Cable assembly characteristics.
CID PIN
Characteristics
AA55568/03-
Headset-microphone with non-noise-canceling voice tube
001
design. The length of the coiled portion of the connector cable
assembly shall be 50.8 centimeters (20 inches) nominal when
retracted and 3.05 meters (10 feet) nominal when extended.
(reference Fig.1)
Headset-microphone with non-noise-canceling voice tube
002
design. The length of the coiled portion of the connector cable
assembly shall be 76.2 centimeters (30 inches) nominal when
retracted and 4.57 meters (15 feet) nominal when extended.
(reference Fig. 1)
Headset-microphone with non-noise-canceling voice tube
003
design. The length of the coiled portion of the connector cable
assembly shall be 127 centimeters (50 inches) nominal when
retracted and 7.62 meters (25 feet) nominal when extended.
(reference Fig. 1)
Headset-microphone with noise-canceling unidirectional
004
microphone design. The length of the coiled portion of the
connector cable assembly shall be 50.8 centimeters (20 inches)
nominal when retracted and 3.05 meters (10 feet) nominal
when extended. (reference Fig. 1)
Headset-microphone with noise-canceling unidirectional
005
microphone design. The length of the coiled portion of the
connector cable assembly shall be 76.2 centimeters (30 inches)
nominal when retracted and 4.57 meters (15 feet) nominal
when extended. (reference Fig. 1)
Headset-microphone with noise-canceling unidirectional
006
microphone design. The length of the coiled portion of the
connector cable assembly shall be 127 centimeters (50 inches)
nominal when retracted and 7.62 meters (25 feet) nominal
when extended. (reference Fig. 1)
QUALITY ASSURANCE PROVISIONS. Quality assurance provisions shall be as specified in A-A-55568.
PACKAGING. Packaging shall be as specified in A-A-55568.
NOTES.
PIN. The PIN should be used for Government purposes to buy commercial products to this CID specification sheet.
See the classification section for PIN format example.
CAGE code. For ordering purposes, inventory control, and submission of these headset-microphones to DLA Land
and Maritime under the Military Parts Control Advisory Group (MPCAG) evaluation program, CAGE code 58536
should be used.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business