MIL-DTL-16225C
DOD-P-15328
-
Primer (Wash), Pretreatment (Formula No. 117 for Metals) (Metric).
MIL-DTL-21981
-
Electronics Equipment, Nomenclature, Serial Numbers and Identification
Plates: Requirements for.
MIL-DTL-24643/23 -
Cable, Electrical, -20 Degrees C to +105 Degrees C, 300 Volts, Type
LSTTSU.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-108
-
Definitions of and Basic Requirements for Enclosures for Electric and
Electronic Equipment.
MIL-STD-167-1
-
Mechanical Vibrations of Shipboard Equipment (Type I - Environmental).
MIL-STD-202
-
Electronic and Electrical Component Parts.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-
5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government
documents, drawings, and publications form a part of this document to the extent specified herein.
Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DRAWING
BUREAU OF SHIPS, CAGE 80064
RE-C-49041
-
Loudspeaker, Navy Type 49546.
(Copies of this document required by contractors in connection with specific acquisition functions may
be obtained from the procuring activity at DSCC.cddwgs@dla.mil, or as directed by the contracting
officer.)
2.3 Non-Government publications. The following documents from a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
ISO 10012
-
Measurement Management Systems Requirements for Measurement
Processes and Measuring Equipment
(Copies of these documents are available online at https://www.iso.ch or from the International
nd
th
Organization for Standardization American National Standards Institute, 11 West 42 Street, 13 Floor,
New York, NY 10036.)
IPC - ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES
J-STD-004
-
Requirements for Soldering Fluxes
J-STD-005
-
Requirements for Soldering Pastes-Replaces QQ-S-571:
1994; Amendment 1 - June 1996
J-STD-006
-
Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed
Solid Solders for Electronic Soldering Applications
(Copies of these documents are available online at https://www.ipc.org or from the IPC - Association
Connecting Electronics Industries, 3000 Lakeside Drive, Suite 309 S, Bannockburn, IL 60015-1249.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business