MIL-DTL-18239E(AS)
c. Nomenclature.
d. Military part number.
e. Manufacturer's part number.
f. Name of manufacturer.
g. Submitted (date under authorization of reference letter authorizing the test).
Acceptance or approval of material during course of manufacturering shall in no case be
construed as a guarantee of the acceptance of the finished product. Acceptance of the finished
product shall be upon a lot basis after satisfactory completion of all required tests.
4.5 Conformance inspections. Conformance inspection shall be as specified in table II.
4.5.1 Inspection lot. An inspection lot shall consist of all earphones produced under
essentially the same conditions and presented for inspection and test at the same time. The unit of
inspection shall be one earphone.
* 4.5.2 Group A inspection. Group A inspection shall consist of the inspections specified in
Table III. All earphones shall be inspected.
* 4.5.3 Group B inspection. Group B inspection shall consist of the inspections specified in
Table III and shall be made on sample units which have been subjected to and have passed Group
A inspection.
* 4.5.3.1 Sampling plan for Group B inspection. The sampling plan shall be in accordance
with table II. If one sample fails the lot is rejected. Contracts for less than ten earphones shall be
subject to 100 percent inspection.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business