INCH-POUND
MIL-PRF-87819B
30 September 2009
SUPERSEDING
MIL-PRF-87819A(USAF)
30 January 1997
PERFORMANCE SPECIFICATION
HEADSET-MICROPHONE, (HEARING PROTECTIVE TYPE, HIGH AND
MODERATE AMBIENT NOISE LEVELS), GENERAL SPECIFICATION FOR
This specification is approved for use by all
Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for headset-microphone with rigid headband.
These parts meet established requirements for communications equipment used to protect against
hazardous noise exposure and are approved for use in certain high and moderate ambient noise level
applications (see 6.1). The term headset is to be used interchangeably for headset-microphone and is
used when referring to any of the articles covered in this specification.
1.2 Classification.
1.2.1 Part or Identifying Number (PIN) (see 3.6). The term PIN is equivalent to the term (part number,
identification number, and type designator), which was previously used in this specification. The products
specified herein (see 3.1) are identified by military PIN's, which consist of the basic specification number,
slash number of the specification sheet, and a sequentially assigned number as shown in the following
example.
87819
/XX
-01
M
Sequentially assigned number
Specification sheet number
Basic specification
M prefix
2. APPLICABLE DOCUMENTS
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
Comments, suggestions, or questions on this document should be addressed to: Defense Supply
Center, Columbus, Attn: VAI, P.O. Box 3990, Columbus, Ohio, 43218-3990 or emailed to
sound@dscc.dla.mil. Since contact information can change, you may want to verify the currency of
this address information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 5965
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business