PT \(see 6.1 and 6.4\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17

'INCH�POUND' by harrysmeltzer - Page 2 of 13

MIL-DTL-11134G

2.2.2 Other Government documents, drawings, and publications. The following other Government documents,

drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,

the issues are those cited in the solicitation or contract.

DRAWINGS

COMMUNICATIONS-ELECTRONICS COMMAND

SC-DL-105364

Handset H-33( )/PT

SC-D-22580

Plug, Connector U-161/U Assembly

SC-C-61800

Microphone Element M-35/U

SC-D-76326

Handle Assembly

SC-C-105379

Receiver Element Assembly.

SC-B-105380

Insert

US NAVY

SK-N-864

Simulated Gunblast Production Equipment

(Copies required by contractors in connection with specific acquisition functions should be obtained from the

contracting activity or as directed by the contracting activity.)

2.3 Non-Government publications. The following documents form a part of this document to the extent specified

herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. (see

AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)

ANSI S1.10

Calibration of Microphones

ANSI S1.12

Laboratory Standard Microphones, Specs for

ANSI S3.7

Method For Coupler Calibration of Earphones

(Copies of these documents are available online from https://www.ansi.org or from the American National Standard

Institute, 25 West 43 Street, 4 Floor, New York, NY 10036.)

INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)

IEEE 258

Test Procedure for Close Talking Pressure Type Microphones

(Copies of these documents are available online from https://www.corporate-communication@ieee.org or from the

IEEE Operations Center, 445 Hoes Lane, Piscataway, New Jersey 08854-1331.)

2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the

text of this document and the references cited herein, the text of this document takes precedence. Nothing in this

document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

3 REQUIREMENTS

3.1 First article. When specified (see 6.2), the contractor shall furnish sample units for first article inspection (see

6.3) in accordance with paragraph 4.2.