MIL-DTL-24223D(SH)
MIL-DTL-24223/2
-
Loudspeaker, Shipboard Announcing Systems Encased, 70 Volt, 6 to 15
Volt-Amperes
MIL-DTL-24223/3
-
Loudspeaker, Shipboard Announcing Systems Encased, 70/95 Volt, 80
Volt-Amperes
MIL-DTL-24223/4
-
Loudspeaker, Shipboard Announcing Systems Encased, High Power,
Rotational, 70 Volt, 250 Volt-Amperes
MIL-DTL-24223/5
-
Loudspeaker, Shipboard Announcing Systems Encased, 50 and 70 Volt,
10 Volt-Amperes
MIL-DTL-24643/15
-
Cable, Electrical, -20 °C to +105 °C, 1000 Volts, Type LSDSGU
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-108
-
Definitions of and Basic Requirements for Enclosures for Electric and
Electronic Equipment
Mechanical Vibrations of Shipboard Equipment (Type I Environmental
MIL-STD-167-1
-
and Type II Internally Excited)
MIL-STD-202
-
Electronic and Electrical Component Parts
MIL-STD-810
-
Environmental Engineering Considerations and Laboratory Tests
MIL-STD-889
-
Dissimilar Metals
MIL-STD-1916
-
DoD Preferred Methods for Acceptance of Product
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-454
-
General Guidelines for Electronic Equipment
(Copies of these documents are available online at https://assist.dla.mil/quicksearch/ or https://assist.dla.mil.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI S1.15-1997
-
Measurement Microphones, Part 1: Specifications for Laboratory
Standard Microphones
ANSI S1.15-2005
-
Measurement Microphones - Part 2: Primary Method for Pressure
Calibration of Laboratory Standard Microphones by the Reciprocity
Technique
(Copies of these documents are available from the American National Standards Institute, 25 W. 43rd St, 4th Floor,
New York, NY 10036 or online at https://webstore.ansi.org/.)
ASTM INTERNATIONAL
ASTM B209
-
Standard Specification for Aluminum and Aluminum-Alloy Sheet and
Plate
ASTM F1836M
-
Standard Specification for Stuffing Tubes, Nylon, and Packing
Assemblies (Metric)
(Copies of these documents are available from ASTM International, 100 Barr Harbor Dr., P.O. Box C700, West
Conshohocken, PA 19428-2959 or online at www.astm.org.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business