MIL-DTL-24223D(SH)
3.25 Identification plate. Loudspeakers shall be furnished with identification plates mounted on the front of the
enclosure. The identification plates shall be in accordance with MIL-DTL-15024 Types A, B, F, or H, and shall be
attached with mounting screws. The identification plates shall be provided for "normal" service in accordance with
MIL-P-15024/5, and tested in accordance with 4.5.1. The following information shall be included on the
identification plate:
Designation "Shipboard Announcing Equipment"
a.
b.
Nomenclature
c.
National stock number
d.
Manufacturer s name
e.
Contract number
f.
Power input
g.
Input voltage to transformer
h.
Frequency range limits
3.26 Special marking for low stray magnetic loudspeakers. See specification sheets. If required, it shall be
tested in accordance with 4.5.1.
3.27 Circuit diagram. A printed schematic interior wiring diagram of the loudspeaker shall be securely affixed
inside the enclosure where it will be easily readable with the cover open. The diagram shall show wire color coding
and terminal designations (and volume selector switch connections, where used). The diagram shall show the
proper connections for different lines and the means for adjusting loudspeaker volume. The diagram plate shall be
in accordance with MIL-DTL-15024 Types A, B, F, or H, shall be attached with mounting screws, and tested in
accordance with 4.5.1.
3.28 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally
preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the
operational and maintenance requirements, and promotes economically advantageous life cycle costs.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as follows:
a.
First article (see 4.2).
b.
Conformance inspection (see 4.3).
4.2 First article inspection. First article inspection shall consist of the examination and tests shown in TABLE
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business