MIL-DTL-13253E
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as
follows:
a. Components inspection (see 4.3).
b. First article inspection (see 4.5).
c. Conformance inspection (see 4.6).
4.2 Test equipment and inspection facilities. Test and measuring equipment and inspection facilities of
sufficient accuracy, quality and quantity to permit performance of the required inspection shall be
established and maintained by the contractor. The establishment and maintenance of a calibration
system to control the accuracy of the measuring and test equipment shall be in accordance with
ISO-10012-1 and NCSL Z540.1. The inspection requirements specified herein are classified as follows.
a. Components inspection (see 4.3).
b. First article inspection (see 4.5).
c. Conformance inspection (see 4.6).
4.3 Components inspection. Components inspection shall consist of certification supported by
verifying inspection and test data, when applicable, that the components listed in table I, which are used
in fabricating the handsets, are in accordance with the applicable referenced document.
TABLE I. Components inspection.
Components
Requirement
Applicable
paragraphs
documents
Earphone elements
MIL-M-13189
Microphone elements
MIL-M-13189
SC-D-1055
Switch assembly
SC-C-105975
SC-D-105992
SC-D-1041
SC-D-60464
Cord assembly
SC-DL-76644
SC-C-101109
S-hook assembly
SC-B-14423
Receiver
SC-B-105976
Transmitter
SC-B-22556
Cap transmitter
SC-C-22547
Cap receiver
SC-C-22546
Plugs
MIL-P-642
SC-DL-34036
Handle
SC-D-22545
SC-D-105992
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business