MIL-DTL-9415B
3.4.1.6.3 Connector disengagement force. The force required to disengage a single two-socket connector from
two 0.095-inch (2.413 mm) diameter stainless steel pins, or to disengage either one of two individual sockets from a
0.095-inch (2.413 mm) diameter stainless steel pin, shall not exceed 4 pounds. Each socket of the connector shall
hold securely a 0.0905-inch (2.299 mm) and a 0.0950-inch (2.413 mm) diameter stainless steel pin respectively from
each of which is suspended an 8-ounce weight (see 4.5.3.3).
3.4.1.6.4 Connector life. There shall be no evidence of damage after a single two-socket connector has been
subjected to 500 insertions into, and withdrawals from, a simulated plug having 0.095-inch (2.413 mm) diameter
stainless steel pins spaced 0.344 inch (8.738 mm) apart, or after a connector consisting of two individual sockets has
been subjected to 500 insertions into, and withdrawals from a simulated plug having 0.095-inch (2.413 mm) diameter
stainless steel pins. After completion of 500 insertions and withdrawals, each socket of the connector shall hold
securely a 0.091-inch (2.311 mm) and a 0.095-inch (2.413 mm) diameter stainless steel pin respectively from each of
which is suspended a 6-ounce weight (see 4.5.3.4).
Inches
mm
Inches
mm
Inches
mm
Inches
mm
.125
3.17
.6875
17.46
2.234
56.746
6.842
173.78
.150
3.81
1.00
25.40
3.00
76.20
7.00
177.80
.21875
5.550
1.59375
40.48
3.4375
87.31
7.125
180.97
.250
6.35
1.7656
44.84
4.330
109.92
7.250
184.15
.343
8.71
2.165
54.99
5.796
147.21
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified tolerances are. .XX ± .02 (.5mm), .XXX ± .005 (.13mm), angles ± 2º.
FIGURE 2. Loudspeaker.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business